Bossini Spare Parts
Official UK Supply Partner
BOSSINI
SPARE PARTS.
SPARE PARTS.
Browse Bossini spare parts for showerheads, hoses, sliders, and accessories. Utilize our Bossini Identification Service by emailing a photo and we will help you match the correct part.
Technical Support Portal
Not sure? Email us a photo
★ Trusted UK stockist
★ 5 star Trustpilot rated
✓ Compatible spares supply
✓ Identify by photo
✓ UK-based support
✓ Technical help by email
-23143-c.jpg?w=550&h=550&v=081E348A-95E6-49AD-9AFA-C136518F0876)
Sort
Showing 6 of 6 Products
Bossini Spare Parts
Showing products 1 to 6 of 6
£0.00 Inc. VAT
£0.00 ex. VAT
DISCONTINUED
£11.30 Inc. VAT
£9.42 ex. VAT
Bossini Rubber Faceplate EGDI0664100
-125366-1-p.jpg?w=500&h=500&v=edb56473-3232-40cb-a8c4-398b9f93d78a)
£0.00 Inc. VAT
£0.00 ex. VAT
DISCONTINUED
Bossini Identification Service
If you are unsure about identifying a Bossini product, avoid guessing. Email clear photos and our experts will assist you in identifying the correct spare part for showerheads, hoses, sliders, and other related accessories. This prevents incorrect orders and ensures you receive the right component the first time.
Send photos. We identify. You order with confidence.
Prefer a quick start? Email now
What to send
1
One photo of the full item (showerhead, slider, hose)
2
Close up photos of any markings or codes
3
Photo of the removed component from multiple angles
4
Basic measurements in mm (width, length, if applicable)
5
Short note describing the issue (leak, blockage, etc.)
How it works
Step 1: Email photos and measurements
Step 2: We identify the closest match
Step 3: You order the correct spare part
Step 2: We identify the closest match
Step 3: You order the correct spare part
Tip: Include a ruler in one photo so we can judge size accurately.
Model Identification Guide
Bossini products often have model codes located on the hand shower base, hose connectors, or within the slider mechanism. Use the guide below to identify where to check before you order.
| Infrastructure | Point of ID | Output |
|---|---|---|
| Shower Heads | Base of the hand shower or neck joint | Model code (example B01SH) |
| Hoses | Near the connectors at either end | Hose model type |
| Sliders | On the mechanism housing, typically underneath | Slider type identification |
| Accessories | Within the packaging or attached labels | Accessory model detail |
Common Spare Parts
The most frequently requested Bossini spares include showerhead components, hose connectors, slider parts, and sealing kits. If unsure, use our Identification Service above.
Common Faults and Fixes
Showerhead dripping
Usually caused by worn seals or incorrect fitting. Replace seals to ensure proper shut-off and function.
Hose leaking
A damaged connector or worn washer can lead to leaks. Identification of the correct connector or washer type is essential.
Slider not holding
This issue can be caused by a worn or broken mechanism. Replacement of the slider component ensures secure holding.
Low water pressure in the shower
Often related to clogging in the showerhead or hose. Cleaning or replacing affected parts can restore proper flow.
Mismatched fittings
Incorrect or incompatible parts can hinder proper installation. Correct identification of model and part is necessary for a suitable match.
Noisy shower operation
This can result from loose fittings or blockages causing flow disruption. Ensure all parts are secure or replace faulty components.
Technical Support FAQ
How do I identify my Bossini showerhead model?+
Check underneath the base of the showerhead for any visible codes or markings. Sending a clear photo can help in identification.
My Bossini shower hose is leaking, what should I do?+
Leaks often result from worn or damaged connectors. Identify the connector type using photos to order the correct replacement.
What photos should I send for the Identification Service?+
Send a full item photo, close ups of markings, photos of the removed part, and a measurement reference such as a ruler for scale.
How do I resolve low water pressure with my Bossini shower?+
Low pressure can be due to blockages in the showerhead or a restricted hose. Clean or replace the necessary parts to improve flow.
What if my part has no code or markings?+
It is common for older parts to lack visible codes. Identification through photos focusing on shape and measurements can often suffice.
Can mismatched parts cause shower issues?+
Yes, incorrect parts can lead to installation and operational issues. Use our Identification Service to ensure compatibility.
How to fix a noisy Bossini shower?+
Noise can occur due to loose parts or blockages. Secure all fittings and clear any obstructions to remedy the issue.