Franke Athena Chrome Kitchen Tap Spare Parts 115.0311.211
Restore your kitchen tap with approved Franke Athena Spare Parts. The Athena series is structurally defined by its elegant swan-neck spout and distinctive twin-lever design. Internal components are Compatible and Selected for the 115.0311.211 model; please cross-reference your specific version to guarantee the correct valve or perlator fitment.
-91171-1-p.jpg?w=500&h=500&v=edb56473-3232-40cb-a8c4-398b9f93d78a)
-92003-p.jpg?w=500&h=500&v=EBC2C194-CD0E-47AB-B59A-35A4BB7C5D7E)
-92005-p.jpg?w=500&h=500&v=55BAD8D1-43FA-4911-A142-BB644CB22774)
Identifying Franke Athena Taps
The Franke Athena (115.0311.211) is one of the UK's most popular kitchen mixers, distinguished by its slim swan-neck spout and dual-lever operation. To ensure compatibility, verify your model number—often found on a small plastic tag attached to the cold-water inlet pipe or within your original user manual.
The Athena features handles that taper slightly toward the base and a spout that utilizes an M24 aerator.
Spare Part Identification Service
Unsure if you have an Athena or a different Franke model? Our expert technical team can verify your tap from a photo. Please include an image of the full tap and the handles.
Start Identification CheckFranke Athena Component Specs
Valve Technology
The Athena typically utilizes a **1/2-inch ceramic disc valve** with 28 splines. Selecting the correct spline count is essential for a secure handle fit.
Aerators & Spouts
Standard Athena spouts use an **M24 flow straightener** (perlator). Replacing this part restores a smooth, aerated stream and reduces splashing.
Troubleshooting Your Athena Tap
Dripping from the spout?
Usually caused by a worn ceramic disc valve. We supply compatible hot and cold valves selected for the Athena range.
Leaking from base of spout?
This indicates the internal spout O-rings have failed. A simple O-ring kit replacement will resolve the leak.
Low water flow?
Often caused by debris in the perlator. Un-screw the aerator at the tip of the spout to clean or replace with a new M24 unit.