Home / Manufacturers / Vitra Spare Parts

Vitra Spare Parts

Official UK Supply Partner

VITRA
SPARE PARTS.

Browse Vitra spare parts for bathrooms and sanitaryware including mixers, cartridges, and seals. Not sure what you need? Use our Vitra Identification Service by emailing a photo and we will help you match the correct part.

Important: WE DO NOT SUPPLY REPLACEMENT CISTERN LIDS FOR VITRA TOILETS

Technical Support Portal

Not sure? Email us a photo

Identify your part Browse Vitra spares Model ID guide FAQ

★ Trusted UK stockist

★ 5 star Trustpilot rated

✓ Compatible spares supply

✓ Technical help by email

✓ Identify by photo

✓ UK-based support

Vitra Spare Parts

Vitra Spare Parts Identification Service

If you cannot find a model code or part number, do not guess. Email us clear photos and we will help identify the correct Vitra spare part for your bathroom fittings including mixers, valves, and seals. This reduces incorrect orders and helps you get the correct cartridge or fitting first time.

Send photos. We identify. You order with confidence.

Prefer a quick start? Email now

What to send

One photo of the full item (mixer, showerhead, toilet flush)

Close up photos of any markings or codes

Photo of the removed cartridge or valve from multiple angles

Basic measurements in mm (width, length if possible)

Short note describing the issue (dripping, malfunction)

How it works

Step 1: Email photos and measurements
Step 2: We identify the closest match
Step 3: You order the correct spare part

Email identification team

Tip: Include a ruler in one photo so we can judge size accurately.

Model Identification Guide

Vitra model codes and markings are often located on the inside of fittings, valve bodies, or the base of cartridges. Use the guide below to identify where to look before ordering.

Infrastructure	Point of ID	Output
Cisterns	Inside ceramic lid, side wall, or base stamp	Model code (example V9856)
Mixers	Base of mixer or cartridge housing	Mixer model
Valves	Valve body, stem markings	Valve type and size
Showers	Thermostat housing, spindle type	Thermostat model

Common Spare Parts

The most frequently requested Vitra spares include mixer cartridges, flush valve components, inlet valves, diaphragms, and seal packs. If you are unsure which version you need, use the Identification Service above.

• Flush valves and diaphragms: Essential for resolving continuous water running issues.

• Mixer cartridges: Vital replacements for leaky or malfunctioning faucets.

• Inlet valves: Needed for slow filling or overflow problems.

• Shower seals: Important when shower temperature or pressure issues arise.

Common Faults and Fixes

Tap dripping

Usually caused by a worn mixer cartridge or seals. Identify the cartridge by dimensions and ensure a correct match.

Cistern running

Commonly linked to a flush valve seal or diaphragm. A photo of the valve assembly helps confirm the type.

Shower temperature swings

Often caused by a worn thermostat cartridge or seal pack. Identification is best with measurements.

Leak at seals

Perished O-rings or seal packs can cause leaks around fittings. Identification is easiest with close-up photos and measurements.

Weak shower pressure

Can result from clogged or misfitting parts. Clear photos help identify the problem.

Noisy pipes

Often caused by worn or mismatched valves. Photos and measurements help ensure correct replacements.

Technical Support FAQ

How do I identify my Vitra cistern model?+

Check the underside of the lid and the side wall for an alphanumeric code. If no code is visible, email clear photos of the internals.

My Vitra tap is dripping, what do I need?+

Dripping is commonly caused by a worn mixer cartridge or seals. Matching the cartridge profile using photos and measurements is the safest route.

What photos should I send for the Identification Service?+

Send a full item photo, close ups of markings, photos of the removed part, and a measurement reference such as a ruler for scale.

How do I identify a flush valve type?+

Look for moulded markings on the valve body and note the assembly. A clear photo of the valve in the cistern often confirms the style quickly.

What if my part has no code or markings?+

That is common on older parts. Photos and measurements often allow identification by shape, spline count and dimensions.

Are Vitra and other brands parts interchangeable?+

Some components may look similar but are not guaranteed compatible. Always verify with model codes or part photos to ensure proper fit and function.

Can you help if I only have the front of the tap or shower?+

Yes, but identification is faster if you can include a photo of the removed cartridge or internal valve along with any measurements you can take.